RWR - ROLLING SECTION

COLD ROLLING
MACHINE WITH
PULLING BLOCKS

Cold rolling/drawing machine for smooth or reinforcing wire up to 6 horizontal or vertical blocks.

Capstan diameters	Number of blocks		Final wire diamEters
560 610 760 900 1200	1 - 6		2.4 - 20 mm
Can use		Rolling speeds
Cassettes Microcassettes Dies		Up to 20 m/s

Cold rolling/drawing machine for smooth or reinforcing wire with motorized head.

Rolling speed						Final wire diameters
Up to 6 m/s						4 - 16 mm
MAIN FEATURES
Easy line threading, no need to wrap-up the wire on the capstans Smaller line foot print Lower investment cost

Cold rolling/drawing machine for smooth or reinforcing wire with the innovative Direct Wire Rolling Technology.

ROLLING SPEED	ROLLING HEADS	FINAL WIRE DIAMETER
Up to 12 m/s	Up to 2	4 - 16 mm
MAIN FEATURES
Extremely high output precision in terms of specific wire weight, shape and straightness Easy line threading, no need to wrap-up the wire on the capstans Automatic roll gap positioning Assisted wire line threading Higher production availability Less operation costs Smaller line footprint Production line changeover and set-up in less than 12 minutes

The purpose of the Stress Relieving Unit is to relieve the stress of the wire after the rolling process.

DiamEter range	Sections	Number of rolls
3 -16 mm	1 or 2 (H or H/V)	7 - 9 per panel
other features
Hydraulic or pneumatic type Easy and repeatable set-up

Cold Rolling Cassetter for low, medium and high carbon steel smooth and reinforcing wires.

This unit has the purpose to straighten the rolled material through two panels installed at 90° in order to straighten both wire axes.

Diameter range	Sections	Configuration
3.4 – 16 mm	Horizontal + Vertical	Manual or automatic